Skip to main content
English French German Italian Spanish

Tyre Pump

Forums

Can any of you learned owners or historians provide details of what make, type and length of tyre pump was supplied as original equipment with the Lightweights and where I can buy one?   I have found various types on ebay but unsure which one to go for.    I have always assumed it was a Dunlop make but based on nothing other than a hunch!   Nick     

Permalink

hello nick yes too  right  this is supposed to be the Norton Owners Club, But still, information of a number for items is not being revelled  in detail  nor as this made any attempts to reproduce any of this hard to find parts  when it did promise to do so  back at the 2014 AGM,  So what's going on  Members   Yours  Anna J

Permalink

I expect there are higher priorities Anna and reproducing niche items like a pump may not be commercially viable even if there is a company willing and able to do it!   I will continue my search on line and report back if I find one!   Nick

Permalink

There was a company at the Kempton Park auto jumble who were selling many tyre pumps for UK built motorcycles.

Permalink

Nick, I fitted a Lightweight chainguard to my Jubilee that was older than the bike and it has lugs for a tyre pump on it. The lugs are twelve and a half inches apart so probably designed to take a pump of thirteen inches or so when the pump is compressed, like you used to get on bicycles.

Dennis

Permalink

Norton (Bracebridge Street at least) appear to have bought pumps from the Birmingham trade. I've seen Norton-marked pumps from Apex (Thapex), Britton and Britannia - The latter two came about due to a split in the family holdings and it's very difficult to know who Norton used when...It may be that they played both companies off against each other in terms of pricing.

AMC may well have had their own suppliers and introduced them on the Norton range when production moved.

Although named pumps are quite sought after for the singles, it really is a niche market. The VMCC used to supply very competent generic replicas that actually worked, in most lengths. I can't imagine that it would be worthwhile to tool up for the metalwork and mouldings to make accurate specific replicas.

Permalink

I do not know the name of the company selling those tyre pumps, but their pumps had the bike's company name printed on them. These tyre pumps should not be that hard to find.

Permalink

My recently-acquired Electra came with a pump fitted below the tank that is thirteen and a half inches long. No markings on it, but its alumunium.

Permalink

My error...

When I've taken off my pump and cleaned it, it says Kromaq on the bottom where the adaptor screws in.

Permalink

Thanks everyone for all the information, a great help towards trying to track one down - I will report back if I am successful!   Take care out there, it is a surreal world at the moment but at least there is less traffic on the roads and the weather is showing signs of improving so I can enjoy peaceful, brisk runs on the Navigator!    Nick

Permalink

Here is a pic of my tyre pump. I bought the pump via Ebay and also the Norton script.

Tyre pump

Permalink

Thanks for that, exactly what I'm after Ulrich!    I can source the Norton transfer, was the pump from an established dealer or a one off sale?   I hope your Navigator is proving reliable after the top end rebuild and with the timing correct - it's looking fantastic!   Nick

 

 



© 2024 Norton Owners Club Website by 2Toucans