---

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9

Items:0    |    Subtotal:£0.00  Basket

£ 0.50  SS03 E3_3717 Grease nipple : Valve guides - Side valve : Pre war type and WD type	£ 4.00  SS03 E3_061690 Holder : Conical seal : Oil pump - Pre MK3	£ 35.00  SS14 D1_A11/142 Valve : Inlet : Inter 500 : NOS shop soiled - Head 1.779in dia : Shaft 11/32 in dia : 4.65 in long
£ 24.65  SS14 D1_18197 Exhaust nut : Exhaust pipe locking ring - All OHV Singles : Exhaust pipe retaining	£ 0.55  SS03 E3_E4440 Stud : Oil pump mounting : 2 required - Pre 20000 Commando engine	£ 7.25  SS12 C2_A2/163 Gudgeon pin : 500cc, 600cc & 633cc Singles - Not 350cc
£ 2.00  SS17 E5_02718 Shim : Crankshaft : Main bearing : 0.003inch thick - Timing side	£ 2.00  SS17 E5_02717 Shim : Crankshaft : Main bearing : 0.010inch thick - Timing side	£ 2.00  SS17 E5_02717A Shim : Crankshaft : Main bearing : 0.005inch thick - Timing side
£ 1.50  SS10 D2_C3/89 Gasket : Push rod cover : Top - 2 required : 1948 - 1957	£ 39.00  SS01 F1_C3/84 Push rod Tube : Chromed - Pre alloy head OHV models : 1948 - 1956	£ 12.00  SS16 E3_C3/713 Tee piece : Rubber : Rocker oil feed : OHV models - 1948 - 1949
£ 4.50  SS10 B1_13040 Stud : Front crankcase to engine plate : 1/2 inch diameter - Stainless steel	£ 70.00  SS12 C1_8894 Rocker box : Bare no cover - Damaged where push rods enter	£ 100.00  SS10 D_19832+60 Barrel : Model 50 : 350cc : 71mm + 60 bore - No fin damage : Requires honing or possibly relining
£ 15.50  SS00 D3_C3/700 Bolt : Rocker box oil feed : OHV Singles - 1948 onwards : Plated	£ 19.95  SS01 E1_22351 Pipe : Rocker oil feed : One piece : OHV Singles - 27 inches long	£ 1.00  SS02 E1_3694 Pivot bolt/pin : With split pin : Valve lifter lever - Side valve : NOS shop soiled : Genuine EX WD
£ 100.00  SS09 G1_K6/24 Crankshaft assembly : Model 19 : Dynamo - Big end probably needs replacing!	£ 100.00  SS09 G1_P13/24 Crankshaft assembly : Model 50 : Alternator - Big end probably needs replacing!	£ 50.00  SS09 G1_L13/24 Crankshaft assembly : Model 50 : Dynamo - Threads damaged both ends! : Big end probably needs replacing!
£ 0.45  SS14 C3_C3/701 Washer : Copper sealing - Various positions	£ 14.25  SS18 D1_C3/92 Cover : Rocker box inspection : Plated - Tappet adjusters	£ 3.90  SS16 E3_C3/88 Seal : Push rod tube : Bottom - 2 required : Valve chest bottom
£ 42.00  SS01 F1_19837 Tube : Push rod cover : Chrome : Model 50 - 1957 onwards	£ 3.00  SS16 E3_18638 Stud : Cylinder barrel : Model 19 - 7.187 inches long	£ 3.00  SS16 E3_19840 Stud : Cylinder barrel : Model 50 - 6.375 inches long
£ 7.00  SS16 E3_19841 Stud : Cylinder barrel : ES2 - 6.656 inches long	£ 1.82  SS10 D2_C170 Washer : Cylinder sleeve nut - Lightweight footrest rod	£ 8.00  SS G5_18799 Cylinder head gasket : Copper - Model 50 1957/1963

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9