---

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21

Items:0    |    Subtotal:£0.00  Basket

£ 2.45  SS05 B2_11181 Washer : Plunger rod retaining : Stainless steel - Frame fork end main rod bottom bolt : Plunger frames	£ 3.15  SS04 E1_063369 Hose Clip : Oil filter retaining : Use with filter 063371 - Stainless steel : To stop oil filter unscrewing	£ 20.00  SS02 F3_A2/295/6 Oil pipes : Feed and return : Pair : Pre 1948 Singles - Copper : Cut and bend to suit
£ 100.00  SS02 G4_19664ASSY Front wheel hub assembly : Full width alloy hub - Complete less lever : Requires cleaning	£ 2.00  SS00 C4_B4/465 Spacer : Distance piece : Rear wheel spindle : Left hand side - Plunger models only : Stainless steel : Rear brake plate outer	£ 1.50  SS00 C4_11181 Washer : Plunger rod retaining : Plated : NOS shop soiled - Frame fork end main rod bottom bolt : Plunger frames
£ 7.50  SS00 C4_19847 Rear brake torque pivot pin - Plated	£ 0.40  SS00 C4_19437 Screw : Socket cap : Handlebar clamps : Early Commando - Plated : Also head steady : Various positions	£ 1.65  SS02 G1_OP/3/8inchI/DEP Oil pipe : Per foot : Codan Ethanol proof - 3/8 inch internal diameter : Ethanol proof
£ 90.00  SS05 B1_50951 Headlight shell : Separate panel type - Includes panel and light switch : Missing captive nuts	£ 12.50  SS00 C4_18232 Locking ring : Rear wheel hub bearing : 26TPI : L/Hand thread - Drives speedo gearbox : Electra : Not Commando	£ 15.00  SS08 D1_030531 Fork shroud : Short : For gaiters : Pair : Top - Fork gaiters 020463 : Can be used on all short Roadholders
£ 50.00  SS03 F1_19208E Oil tank assembly : Including connector - Painted : No dents	£ 28.50  SS03 H2_067723PRO Fork Springs : Pair : Progressive rating - Can be used in all Short Roadholder forks	£ 3.77  SS02 E2_19437 Screw : Socket cap : Handlebar clamps : Early Commando - Stainless steel : Also head steady : Various positions
£ 0.12  SS02 E2_E3238 Nut : Footrest rod : Plain : Plated - Various positions : Engine plate bolts, crankcases	£ 0.45  SS02 E2_E5375 Spring washer : 7/16 inch : Stainless steel - Various positions	£ 0.15  SS02 E2_11809 Washer : Thick :1/2 inch internal diameter : Plated - Various positions
£ 7.25  SS14 D3_E4256 Bolt : 7/16 inch diameter : Crankcase to engine plates - Plated : Magneto platform	£ 5.50  SS02 E2_A2/454 Nut : Rear wheel : Thread 9/16 x 20TPI - Plated	£ 25.00  SS03 F2_030531 Fork shroud : Short : For gaiters : Pair : Top - NOS shop soiled : Fork gaiters 020463
£ 8.95  SS08 E2_B2/615 Locking ring : Fork seal and bush : Long Roadholder forks - Stainless steel : 2 required	£ 2.35  SS02 E2_19848 Nut : Rear brake torque pivot pin -	£ 8.50  SS02 E2_067359 Bush : Rear suspension unit : 0.750 inch long : Pair - 3/8 inch diameter internal : 0.865 inch external diameter
£ 0.26  SS23 64A_8052 Washer : 5/16 I/D : Large diameter : Plated - Various positions	£ 0.50  SS00 D6_T320 Washer : Fork stanchion top nut : Roadholder forks - Plated	£ 4.95  SS00 D6_18234 Spacer : Distance piece : Rear wheel - Plain side : Inside speedo drive
£ 3.65  SS00 D6_19714 Washer : Felt retaining : Rear wheel - Full width alloy hub	£ 55.00  SS08 E1_H12/584 Pillion footrest assembly : Pair : including rubber - Complete ready to fit	£ 80.00  SS03 H2_K12-2/655 Hub assembly : Front wheel : Including brake plate assembly - Half alloy half steel type

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21