---

Items per page 30 30 60 90 120 150 page: 1  2  3  4

Items:0    |    Subtotal:£0.00  Basket

£ 15.00  SS12 C2_23872 Spacer : Carb to head : 1 inch thick : Bore 1.125inch - Tapping for balance pipe : Will replace 23394	£ 2.60  SS11 B3_622/197 Float needle : Viton tipped - Concentric carbs : Also Monobloc	£ 4.90  SS11 B3_95/14 Petrol tap nut with 90deg elbow - 1/4 BSP
£ 6.50  SS11 B3_60-7266 Petrol tap : Main - BAP type : 1/4 x 1/4 BSP	£ 6.50  SS11 B3_60-7267 Petrol Tap : Reserve - BAP type : 1/4 x 1/4 BSP	£ 22.05  SS11 B3_A2/280 Petrol tank cap : 2.5in : Winged nut type - Pattern
£ 1.60  SS01 D2_21572 Fibre distance piece : 1.6in centres - Carburetter manifold to cyclinder head	£ 18.50  SS01 E1_20222/3 Knee grip rubbers : Pair - Wideline 1957 on	£ 1.00  SS11 B3_376/061 Spring : Throttle slide - Monobloc carburettors
£ 0.80  SS01 D2_063458 Heat insulator : 32mm bore : Inlet manifold - 1.6mm thick : Tufnol	£ 1.65  SS01 D2_NM23358 Heat insulator : 30mm bore : Inlet manifold - 1.6mm thick : Tufnol	£ 0.80  SS01 E1_22764 Strap : Petrol tank retaining : Rear - Slimline petrol tanks : O Ring
£ 2.00  SS03 E1_6/155 Drain plug : Amal Concentric carburettors : Metal - As per original style : Hex type available 622/155H	£ 1.75  SS05 D4_622/078 Banjo bolt : Concentric carburettors -	£ 1.35  SS04 E2_PP1/4inchI/D/CC Petrol pipe : Per foot : Codan : Braided cloth covering - 1/4 inch internal diameter : Ethanol proof
£ 1.75  SS03 E2_T2241 Fibre distance piece : 1.5in centres - Carburetter manifold to cylinder head	£ 0.60  SS03 E2_18035 Stud : Dual carb manifold fixing - Vertical type mountings	£ 10.00  SS17 E3_14/015 Float : Pre Monobloc carbs : Soldered copper type - NOS shop soiled
£ 4.50  SS01 D1_901/28 Insulator : Carburettor : 28mm bore - 3mm thick : 2 inches between centres	£ 16.95  SS11 B3_73066 Petrol tap : Push/pull type : 1/4BSP threads - Ethanol proof : Teflon seals : CNC machined	£ 8.45  SS11 B3_031746 Petrol tap : Reserve : Flat lever type - Ethanol proof : 1/4 x 1/4 BSP
£ 0.52  SS11 B3_622/082 'O' ring : Friction for throttle stop and pilot air screw - Amal Concentric carburettor	£ 0.70  SS18 D1_T2006 Stud : Carb to inlet manifold : Oil junction block - Various positions	£ 30.00  SS02 B1_19667 Air filter assembly : Featherbed - Single carburettor 'D' shaped
£ 4.00  SS01 F2_24572 Air filter retainer plate - Wedge air filter assembly : Concentric	£ 4.00  SS01 F2_23552 Air filter retainer plate - Wedge air filter assembly : Monobloc 650cc	£ 2.00  SS11 B3_AMAL376 Gasket set - Amal 376 Monobloc : Includes gaskets and washers
£ 1.00  SS11 B3_376/100-50 Carburettor main jet - Size 50	£ 16.85  SS11 B3_73084 Petrol tap : 1/4 BSP both ends : Reserve type : Ethanol proof - Solid brass : Nickle plated : No rubber componants!	£ 1.00  SS11 B3_376/100-60 Carburettor main jet - Size 60

Items per page 30 30 60 90 120 150 page: 1  2  3  4